This use case describes how to validate that smoke is detected and presented correctly in the app. 

Before starting the test make sure that: 

User initiates a test on the smoke alarm using an approved smoke alarm test spray (or something that can simulate smoke). 

If push is blocked, only local alarm sounds; user fixes notification settings and re-tests. 

How to test that the Water Leak Detector correctly detects a leak and triggers local and remote alerts. 

Push messages from the app are not blocked by the settings in the phone (when installing the app, be sure to accept push messages)

The metal object is used to connect the two sensor pins to each other, or fingers covering both the sensors at the same time. 

This use case describes how to test the water leak detector probe connected to the Water Leak Detector. 

The Water Leak Detector Probe comes into contact with water. 

This use case describes how to confirm humidity readings in the app and validate alerts for high/low humidity (risk of mold/condensation). 

User changes humidity near the sensor (e.g., moving it temporarily to bathroom during shower, or using a humidifier/dehumidifier nearby) or uses app thresholds (if supported). 

User reviews 24h/7d trend (if available) to validate stability and sampling. 

User compares rooms to demonstrate value (bathroom vs living room). Smart Siren

How to verify that the Smart Siren activates correctly for configured alarm events such as smoke, water leaks, or intrusion.

This use case describes how to confirm that the Smart Siren activates on configured alarm events (smoke, leak, intrusion). 

User triggers a test alarm (e.g., Intelligent Smoke Alarm test button or Water Leak Detector test). 

• The alarm event occurs, but the Smart Siren does not activate. 

• The user links the siren to the relevant alarm type in the app and repeats the test.

• The Smart Siren does not sound due to an active quiet-hours schedule. 

• The user reviews and verifies the siren configuration.

This user case describes how to validate that the Smart Plug Mini 2 works as expected in the Eva Smart Home app for: (1) on/off control, (2) energy/power monitoring, and (3) automations (schedules/scenes). 

The user wants to control a non-smart device from the Eva Smart Home app with the smart plug, view power/energy usage, and create an automation that turns the plug on/off automatically. 

Test the Evaluation Kit

Test the Evaluation Kit

Set up and test the products in the Evaluation Kit.